Power Source | 120 V AC, 60 Hz |
Power Consumption | 690 VA (at rated output), 260 W (According to UL60065), 63 W (at no signal) |
Rated Output | 240 W, 21 Ohm (according to UL60065) 200 W, 25 Ohm (according to UL2572) 200 W, 25 Ohm (according to CAN/ULC-S576 with separate UPS) 100 W, 50 Ohm (according to CAN/ULC-S576) (All total of Speaker output 1 - 6 and Direct Output) |
Frequency Response | 50 Hz - 20 kHz, +/-3 dB (at 1/3 rated output), 800 Hz - 2.8 kHz (according to UL2572); 400 Hz - 4 kHz (according to CAN/ULC-S576) |
Distortion | Under 0.7% (at rated output, 1 kHz) |
S/N Ratio | Over 85 dB |
Audio Input/Output Characteristic | Sampling frequency 48 kHz A/D D/A CONVERTER: 24 BIT |
Input | Input 1 - 3: -50 dB* (MIC) / -10 dB* (LINE) (changeable), 600 Ohm , electronically balanced, combined XLR connector (female) / phone jack Input 4: -50 dB* (MIC) / -10 dB* (LINE) (changeable), 600 Ohm , electronically balanced, removable terminal block (14 pins) BGM 1 - 2: -10 dB*, 10 k Ohm , unbalanced, RCA pin jack External AMP Input: 70 V line, removable terminal block (14 pins) |
Output | Speaker output 1 - 2: Max. (240 W) per output Speaker output 3 - 6: Max. (100 W) per output Speaker output 1 - 6: Total within rated output, removable terminal block (14 pins) Allowable minimum load: 245 Ohm (20 W) at 70 V line for speaker line failure detection Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins) Recording output BGM/Paging: 0 dB*, 10 k Ohm , unbalanced, RCA pin jack Ground faults detection: 0 Ohm Wire to wire faults detection: 0 Ohm |
RM Link | Input 1 - 2: Connecting the RM-300MF/200M Remote Microphone, RJ45 female connector Maximum distance: Total 800 m between this unit and remote microphones Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
Network I/F | 10BASE-T/100BASE-TX (selectable by automatic negotiation), RJ45 female connector; Maximum distance: 100 m between this unit and a switching hub; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
VM Link | Output: Connecting the VM-3240E, RJ45 female connector Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
General Control | Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (14 pins) Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,operating current: 10 mA or less, removable terminal block (14 pins) |
Power Input/Output | Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC); PS out: 28 V DC / 18 A; M4 screw terminal, distance between barriers: 11 mm |
22 V DC Output | 22 V DC Special Application, Maximum feeding current 0.3 A (for RM-200M only) |
DS Link | Connecting the VX-2000DS, RJ45 female connector; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
Finish | Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint |
Operating Temperature | 0 to 49°C (32 to 120°F) |
Operating Humidity | 5% to 95% RH (no condesnsation) |
Dimensions | 482 (W) x 132.6 (H) x 431.2 (D)mm (18.98" x 5.22" x 16.98") |
Weight | 16.5kg (36.38 lbs) |