Features:
- 8 Tuner (DVB-S2/DVB-T)
- 8 Tuner (ATSC)
- 8 Tuner (QAM)
- 8 Tuner (ISDB-T)
- QAM-256/64 & ATSC (8VSB) formats supported
- IP TS output
- MPTS over UDP, RTP/RTSP output as mirror of ASI output (RJ45)
- SPTS optional as well
- 2 ASI Inputs means it can be used as a dual ASI to IP Gateway as well
- Integrated demodulating and multiplexing functions
- Select which channels to stream out via SPTS
- Multiplex one program to all outputs
- Closed Captions supported
- Full IP control and Network Management through browser
- IPTV Output Unicast or Multicast IGMP UDP
- AC3, MPEG2 Audio
- MPEG2 Video or MPEG4 H.264
- Perfect Full HD Video Quality-No Loss
In today's digital RF, each 6Mhz channel off air ATSC (8VSB) or CABLE TV QAM channels can contain many TV programs. For example 57Mhz is Ch #2, it can have programs 2.1, 2.3, and so on. This unit can convert all the TV programs inside the 8 frequencies and convert it directly to IPTV multicast or unicast, as well as, MUX'd ASI output. Unit features 2 ASI inputs as well, so it can be a multi ASI input to IP Gateway too.
- Converts 8 Antenna RF (off air) or cable Frequencies (channels) / ALL Received TV Services from each > TO > IPTV Streaming SPTS
- Output up to 45x spts RTP/UDP multicast streams you can receive on any computer, tablet, mobile, IP decoder
The 8 RF Tuner Input Multiplexer is the latest demodulation and multiplexing device for digital TV broadcasting head-end system with TS output through ASI and IP port. It can multiplex up to 8 channels tuned and 1 ASI input to one MPTS.This multiplexer has the functionality of supporting auto-generation of PSI/SI information, PID re-mapping, service filtering and PCR adjusting. This unit offers to be used in either MPTS format or SPTS allowing you to aggregate all your programs from the tuner, or parsing them through selection options in the program menu to customize the IP output. This units incredible integration and cost effective design make this device readily widely used in the Next Generation of CATV Broadcasting system.
This is the simplest way to convert existing RF Channels to IP streams clearly and directly, this unit does not encode, it is just a gateway so if the incoming cable QAM channels are MPEG2, then the output IP channels will be MPEG2, same goes with H264 as well. This is an easy to grab OTA or QAM frequencies and directly convert them to RTP/UDP Streams to an existing IPTV channel lineup.
