Renogy, RCC20VOYP, Voyager 20A PWM Waterproof Solar Charge Controller
Features:
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types; The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows Users to monitor and control charging.
The Voyager 20A is a class leading 20-amp charge controller with an IP67 rating. It is perfect for outdoor use, and can withstand water spray, rain, and condensation. Equipped with advanced PWM technology, it supports both 12V and 24V off-grid applications, and is compatible with 4 different battery types, including Lithium Iron Phosphate. The Voyager 20A also ensures your system's longevity with solar panel, battery, and controller protections.
Note: Please set the voltage manually to charge lithium batteries.
Efficient, Stable, and Safe Charging
Utilizing smart PWM technology, the Voyager provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery. It also provides multiple battery, controller, and PV electronic protections to ensure charging and usage safety.
Compact and lightweight
The Renogy Voyager PWM Waterproof Controller is compact and lightweight, making it perfect for applications with limited space. With a weight of only 0.55lb, a height of 3.84 inches and a width of 6.08 inches, this controller is ready to be installed in small spaces.
Common Positive Ground
The Voyager PWM Waterproof Controller is a common positive ground charge controller, beneficial in ensuring charging safety.
Temperature Monitor and Compensation
Fitted with a Remote Temperature Sensor Port, the Voyager can measure battery temperature in real-time and use this data for very accurate temperature compensation, assuring stable and constant charging.
Extremely Low Self-Consumption
In a 12V system, the Voyager PWM Waterproof Controller only needs 0.22w/h or 1.92kmh/365days. Therefore, consuming extremely low levels of energy while working to charge your battery.
Automatic Voltage Detection
The Voyager PWM Waterproof Controller supports both 12V and 24V systems and can automatically identify system voltage once connected to a Gel, AGM, Flooded battery bank. Please set the voltage manually to charge lithium batteries.
Note:
- For Users using PWM controller in their solar system, highly recommend you to connect the solar panels in parallel since it will maintain the PV output voltage under which the controller will work in high efficiency.
- Never install the controller in a sealed enclosure with flooded batteries as gas can accumulate and there is a risk of explosion.
- The solar controller should be installed as near the battery as possible to avoid efficiency loss.
- Incorrect battery type setting on the controller may damage your battery. The system auto-recognition is only adapted to Gel, AGM, and Flooded batteries so when using the Voyager to charge a lithium battery bank, please manually set the system voltage otherwise the over-discharged lithium battery will not be activated.
- To maintain best controller performance, it is recommended to avoid any damage or wear wire going into the controller and make sure all terminals are tighten, inspect any loose, broken, or burnt up connections, and occasionally clean the case using a damp cloth.
