PWB-450-WHT Includes Only:
- Wall Box
- Mounting Hardware
Features:
- Rugged 14 gauge steel back box
- Two part cover
- Simple installation
- 4 integrated AC outlets are pre-wired for ease of installation
- Internal brackets can be removed to accommodate mounting larger devices
- Connections and cables are hidden behind cover for a neat install
It mounts in a typical 4'' deep wall between the studs in a standard 16'' stud bay. It provides connectivity, internal device mounting and power in a secure and invisible manner. The cover is flush to the wall allowing the display to be mounted as close as its mount will allow. The cover is ventilated top and bottom to provide convection cooling as well as a cable exit slot to pass cables from the box to the display.
Inside it is four (4) pre-wired AC outlets along one vertical side of the box which are isolated from the four (4) accessory plate mounting brackets to allow AC and low voltage connections within the same box. There is a 1/2'' - 3/4'' concentric KO on the top and bottom of the box for the AC conduit connections. 1'' KO's in the divider plates allow the use of one or more accessory plates for AC connections.
Three of the accessory plate brackets are punched for a single gang Decora opening while the fourth bracket is punched for FSR's IPS Connector Plates. Behind each bracket is a 3/4'' and a 1''-1-1/2'' concentric KO providing ample wiring flexibility and easy installation.
Applications:
- Digital Signage
- Huddle Areas
- Hospitals
- Conference Centers
- Schools
- Airports
- Command Centers
- Electronic Billboards
- Museums
- Arenas
