Buy ComNet CNGE3FE7MS4, Substation-Rated Managed Ethernet Switch

1-855-969-9322
1-908-282-3332 (Intl.)

Comnet, CNGE3FE7MS4, Electrical Substation-Rated Managed Ethernet Switch, with (7) 10/100T(X) + (3) Configurable 10/100/1000T(X)/100/1000FX Ports.

Features with all optional accessories:

Provided HTTPS/SSH protocol enhances network security
DDM (Digital Diagnostic Monitoring) remotely ascertains the status of the operating voltage, current, and operating temperature of the SFP modules
Fully compliant with the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations, EN50155 for railway applications, and NEMA TS-1/TS-2 for traffic signal control equipment
Port based VLAN (IEEE 802.1Q)
Fully configurable through web-based or SNMP network management
Compliant with EN60950-1 and UL 508 Class 1, Division 2 (Groups A, B, C & D) for use in Hazardous Locations
Environmentally hardened for deployment in difficult unconditioned out-of-plant and roadside installations
PTP Client for precision time protocol clock synchronization
Internal/self-contained universal high-voltage power supply: 85-264 VAC/88-373 VDC operating range. Redundant power supply capability significantly reduces the possibility of a single-point-of-failure for the highest possible system and network reliability
Supports ComChain, the ComNet-exclusive technology that provides add-on network redundancy topology to any backbone network. ComChain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology, while maximizing fault-recovery speed, flexibility, compatibility, ease of use, and cost-effectiveness.
Fault/event notification provided through Syslog, e-Mail, SNMP trap, or relay alarm output
10/100 BASE-T(X), 10/100/1000T(X), and 100/1000 BASE-FX compatible
IGMP Snooping V1/V2/V3 for multicast filtering, and IGMP Query V1/V2
No fans or forced-air cooling; cooling via natural convection eliminates unreliable and troublesome fans/moving parts, with no periodic maintenance requirements.
Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately).
Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Web-based, Telnet, Console (CLI), and Windows-based utility (eConsole) configuration
Rigid aluminum housing
Designed for wall or DIN rail mount installations

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Technical Details

Reviews

System Interface/Performance
Switch Architecture	Back-plane (switching fabric): 7.4 Gbps. Packet throughput ability (full duplex): 11 Mbps 64 bytes
Transfer Rate	14,880pps for Ethernet port. 148,800pps for Fast Ethernet port. 1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer	1 Mbit
MAC Table	8192 MAC Addresses
Flash ROM	4Mbytes
DRAM	32Mbytes
Console/TELNET Port
Protocol	RS-232 serial data
Bandwidth	9600 bps
Connector type	RJ-45
Network Cabling Compatibility	10Base-T: 2-pair UTP/STP Cat. 3, 4, or 5 cable. EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/5E cable. EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5e or 6 cable. EIA/TIA-568 100-ohm (100m)
Connectors
10/100T(X)	7 RJ-45
Combo/Uplink Ports	10/100/1000T(X): 3 RJ-45 100/1000FX: 3 SFP
RS232 Console Port	RJ-45
Power	6-position screw-terminal block
Alarm Contacts	Screw terminals
Optical Fiber Compatibility
Multimode	50/125 m — 62.5/125 m
Single Mode	9/125m
Connector Type	Dependent on user-selection of sold-separately SFP Modules. Small Form-Factor Pluggable Modules for model number and description of applicable SFP modules.
Protocol	CSMA/CD
Local & Remote Monitoring Capability
Status Indicating LEDs	10/100TX: Link/Activity (Green) Full Duplex/Collision (Yellow) Gigabit Copper: Link/Activity (Green) Speed: 1000Mbps (Green) SFP: Link/Activity (Green) Power (Green), Power 1 (Green), Power 2 (Green) System Summary Fault (Red) Ring Master (Green)
DDM	(Digital Diagnostic Monitoring) Remotely ascertains the status of the operating voltage, current, and operating temperature of the SFP modules
Relay Alarm	Alarm relay output for port breakdown or power failure indication. Relay contact rating: 1A 24V DC, resistive. Contacts are normally open (NO)
Internal Power Supply/Operating Power
Input Voltage Range	85-264 VAC or 88-373 VDC
Power Consumption	12 W
AC Power Line Frequency	47 to 63 Hz
Redundancy	Redundant AC/DC power supply capability is included to reduce the possibility of a singlepoint-of-failure, for the highest possible switch and network reliability
Reverse polarity protection for the 88-373 VDC input	Overload Current Protection
Mechanical
Housing	Aluminum
Mounting	Standard DIN-Rail (35mm track) or Panel Mount (Panel mount adapter included)
Ingress Protection Rating	IP-30
Cooling	Natural convection
Environmental
MTBF	>250,000 hours
Relative Humidity	5% to 95%
Operating Temperature	-40C to 85C
Storage Temperature	-40 C to -85 C
Agency Standards Approval & Compliance
EMI	FCC Class A, CE EN61000-4-2 (ESD), CE EN61000- 4-3 (RS), CE EN61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN55022, CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4
IETF RFC Compliance	RFC768-UDP, RFC783-TFTP, RFC791-IPRFC792- ICMP, RFC793-TCP, RFC827-ARP,RFC854-Telnet, RFC894-IP over Ethernet,RFC1112-IGMP v1, RFC1519-CIDR, RFC1541-DHCP (client), RFC2030-SNTP, RFC2068-HTTP, RFC2236-IGMP v2,RFC2475-Differentiated Services,RFC2865- Radius, RFC3414-SNMPv3-USM, RFC3415- SNMPv3-VACM
IETF SNMP MIBS	RFC1493-BRIDGE-MIB, RFC1907-SNMPv2-MIB, RFC2012-TCP-MIB, RFC2013-UDP-MIB, RFC2578- SNMPv2-SMI, RFC2579-SNMPv2-TC, RFC2819- RMON-MIB, RFC2863-IF-MIB, draft-ietf-bridgerstppmib-03-BRIDGE-MIB, draft-ietf-bridgebridgemib-smiv2-03-RSTP-MIB, IANAifType-MIB
Safety	UL, cUL, CE/EN60950-1; UL 508 Class 1, Division 2, (Groups A, B, C and D) for Hazardous Locations
Stability Testing	IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

System Interface/Performance
Switch Architecture	Back-plane (switching fabric): 7.4 Gbps. Packet throughput ability (full duplex): 11 Mbps 64 bytes
Transfer Rate	14,880pps for Ethernet port. 148,800pps for Fast Ethernet port. 1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer	1 Mbit
MAC Table	8192 MAC Addresses
Flash ROM	4Mbytes
DRAM	32Mbytes
Console/TELNET Port
Protocol	RS-232 serial data
Bandwidth	9600 bps
Connector type	RJ-45
Network Cabling Compatibility	10Base-T: 2-pair UTP/STP Cat. 3, 4, or 5 cable. EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/5E cable. EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5e or 6 cable. EIA/TIA-568 100-ohm (100m)
Connectors
10/100T(X)	7 RJ-45
Combo/Uplink Ports	10/100/1000T(X): 3 RJ-45 100/1000FX: 3 SFP
RS232 Console Port	RJ-45
Power	6-position screw-terminal block
Alarm Contacts	Screw terminals
Optical Fiber Compatibility
Multimode	50/125 m — 62.5/125 m
Single Mode	9/125m
Connector Type	Dependent on user-selection of sold-separately SFP Modules. Small Form-Factor Pluggable Modules for model number and description of applicable SFP modules.
Protocol	CSMA/CD
Local & Remote Monitoring Capability
Status Indicating LEDs	10/100TX: Link/Activity (Green) Full Duplex/Collision (Yellow) Gigabit Copper: Link/Activity (Green) Speed: 1000Mbps (Green) SFP: Link/Activity (Green) Power (Green), Power 1 (Green), Power 2 (Green) System Summary Fault (Red) Ring Master (Green)
DDM	(Digital Diagnostic Monitoring) Remotely ascertains the status of the operating voltage, current, and operating temperature of the SFP modules
Relay Alarm	Alarm relay output for port breakdown or power failure indication. Relay contact rating: 1A 24V DC, resistive. Contacts are normally open (NO)
Internal Power Supply/Operating Power
Input Voltage Range	85-264 VAC or 88-373 VDC
Power Consumption	12 W
AC Power Line Frequency	47 to 63 Hz
Redundancy	Redundant AC/DC power supply capability is included to reduce the possibility of a singlepoint-of-failure, for the highest possible switch and network reliability
Reverse polarity protection for the 88-373 VDC input	Overload Current Protection
Mechanical
Housing	Aluminum
Mounting	Standard DIN-Rail (35mm track) or Panel Mount (Panel mount adapter included)
Ingress Protection Rating	IP-30
Cooling	Natural convection
Environmental
MTBF	>250,000 hours
Relative Humidity	5% to 95%
Operating Temperature	-40C to 85C
Storage Temperature	-40 C to -85 C
Agency Standards Approval & Compliance
EMI	FCC Class A, CE EN61000-4-2 (ESD), CE EN61000- 4-3 (RS), CE EN61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN55022, CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4
IETF RFC Compliance	RFC768-UDP, RFC783-TFTP, RFC791-IPRFC792- ICMP, RFC793-TCP, RFC827-ARP,RFC854-Telnet, RFC894-IP over Ethernet,RFC1112-IGMP v1, RFC1519-CIDR, RFC1541-DHCP (client), RFC2030-SNTP, RFC2068-HTTP, RFC2236-IGMP v2,RFC2475-Differentiated Services,RFC2865- Radius, RFC3414-SNMPv3-USM, RFC3415- SNMPv3-VACM
IETF SNMP MIBS	RFC1493-BRIDGE-MIB, RFC1907-SNMPv2-MIB, RFC2012-TCP-MIB, RFC2013-UDP-MIB, RFC2578- SNMPv2-SMI, RFC2579-SNMPv2-TC, RFC2819- RMON-MIB, RFC2863-IF-MIB, draft-ietf-bridgerstppmib-03-BRIDGE-MIB, draft-ietf-bridgebridgemib-smiv2-03-RSTP-MIB, IANAifType-MIB
Safety	UL, cUL, CE/EN60950-1; UL 508 Class 1, Division 2, (Groups A, B, C and D) for Hazardous Locations
Stability Testing	IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

ComNet CNGE3FE7MS4 Substation-Rated Managed Ethernet Switch

Identifiers

Technical Details

Reviews