Buy Aviom Mix320-A, Personal Mixing System with Analog Interface

[email protected]

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Interface:: Interface: Analog Interface

Mix320-A Includes Only:

(1) AN-16/i v.2 Input Module
(1) D400 A-Net Distributor
(6) A320 Personal Mixers
(6) MT-1a Microphone Stand Mounts
(7) Cat-5e cables

The Mix320-A Personal Mixing System includes everything you need to create a 16-input personal mixing system for six performers. It's perfect for stage or studio use.

Connect balanced analog inputs from a mixing console for live use or to the outputs of your DAW recording interface or console to create a studio cue system.

The A320 Personal Mixers get their digital data and power over the same cable, so all you need to do is connect a Cat-5 cable and you're ready to start using the system.

Product Details

The Mix320-A Personal Mixing System features the analog AN-16/i v.2 Input Module as the front end of the system, a D400 A-Net Distributor to supply A-Net digital data and DC power to the mixers, and six A320 Personal Mixers for the performers. It also includes six MT-1a Microphone Stand Mounts for attaching the A320 mixers to Microphone stands, as well as all the Cat-5e cables you'll need to connect the products.

Intuitive Mixing

The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features 16 mono or stereo mix channel buttons, individual volume controls, and easy-to-use Stereo Placement controls. Connect headphones, ear buds, or a wireless in-ear monitoring system to the Personal Mixer and you're ready to start mixing.

Analog Front End

The analog AN-16/i v.2 Input Module allows up to 16 line-level signals to be connected as the inputs to the personal mixing system. Each channel features a 1/4-inch TRS balanced input and thru jack that make it easy to interface with direct outs, aux sends, or insert points on your mixing console or recording interface. Analog audio is converted to 48kHz, 24bit A-Net digital data for distribution to the Personal Mixers.

Power and Audio Over Cat-5

For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the Mix320-A system includes the D400 A-Net Distributor. The D400 has A-Net In and Out jacks plus eight powered A-Net ports for Personal Mixers.

System Options

The Mix320-A system is designed around an analog front end, the AN-16/i v.2. If you use a digital console, check out the Mix320-Y Personal Mixing System which includes a Y1 card for Yamaha® consoles instead of the analog inputs. Or, if you have a Dante™-enabled console or network, the Mix320-D Personal Mixing System is what you need. It includes the D400-Dante A-Net Distributor instead of the D400 and does not require a separate input device or console card.

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Technical Details

Reviews

Subject to the use of all the optional accessories
A320 Specifications
Audio Output	1/4" TRS stereo, headphone or line level
Stereo Mix Output, Headphone/Line	Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
A-Net I/O	1 A-Net In, RJ45 connector; Supports Pro16 and Pro16e
D/A Conversion	44.1/48kHz, 24-bit
Stereo Operation	Stereo Link, per channel pair; Set at the input module; Variable pan per mono channel or pan/spread per stereo channel pair
Headphone Output	275 mW per side into 50 Ohms (both sides driven)
Output Impedance	5 Ohms
Freq. Response	3Hz-22kHz +0.2dB/-3dB at 50 Ohms
THD +N	< 0.003%
Output Voltage for Personal Mixers	24VDC, 0.5 amp Transmitted over the Cat-5e cable
Signal to Noise (unweighted)	-106dB (measured with zero data into all channels)
Latency	0.880 msec (measured from analog input to analog output)
Pro16e A-Net	Use Cat-5e (or better) cable; Maximum 400 ft (122 m) between devices; Supports Power Over A-Net
Cat-5 cable	Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Power	24 VDC, 0.5 amp; Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor
Dimensions	10.26" (260.6 mm) wide x 6.14" (155.95 mm) deep x 1.91" (48.51 mm) high
Weight	1.3 lb. (0.59 kg)
Options	MT-1a Microphone Stand Mount
AN-16/i v.2 Specifications
Audio Inputs	16, balanced line-level, 1/4-inch TRS connector
Inputs	Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru	Impedance matched output
Analog to Digital Conversion	48kHz sample rate, 24 bit
Frequency Response	4Hz-22kHz
A- Net In	One Category 5 (RJ45 connector) Four-position slot range selector switch for use with Pro16e A-Net
A-Net Out	One Category 5 (RJ45 connector)
Gain Settings	Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators	Signal Present and Clip, per channel
Line Inputs	Impedance: 48k ohms
Metering	LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation	Stereo Link, per channel pair; Two-position switch (Normal, Link)
Maximum Input Level	+22dBu
Input Impedance	17.8k ohm
Freq. Response	4Hz-22kHz +0.2dB/-3dB
THD +N	< 0.003%
Crosstalk	-90dB
Bit Error Rate (BER)	10(-12)
Signal to Noise (unweighted)	90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
Digital Outputs	A-Net: 1; RJ45 connector
Pro16e A-Net	Use unshielded Cat-5e UTP (or better) cable
Latency	<0.880 msec (measured from analog input to analog output)
Power Supply Input Voltage Output Voltage Plug Size	External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 18-24 VDC, 0.5 amp 2 mm
Power	18-24 VDC, 500mA
Dimensions	19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
Weight	6.8 lb (3.08 kg)
D400 Specifications
A-Net Input	Pro16 or Pro16e A-Net; RJ45 connector
A-Net Offset Base Slot	2-position DIP switch selects the starting channel that Personal Mixers will receive from the network (1, 17, 33, or 49)
Defeat Stereo Switches	Chooses between local (front panel) stereo links (up) or network stereo links (down)
A-Net Out to Personal Mixers	Eight RJ45 connectors, powered
A-Net Out	Pro16e A-Net; RJ45 connector, unpowered
LEDs	Power On (red); Network Sync (green)
Stereo Link	Two 8-position DIP switch blocks (1-16, 17-32)
Output Voltage for Personal Mixers	24VDC, 0.5 amp Transmitted over the Cat-5e cable
A-Net Cables	Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections
Power Supply	Internal, IEC connector
Input Voltage	100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz at220 W max
AC Fuse Types	115V range: T2.5AL/250V 230V range: T1.25AL/250V
Dimensions	19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high
Weight	12.0 lbs (5.44 kg)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Subject to the use of all the optional accessories
A320 Specifications
Audio Output	1/4" TRS stereo, headphone or line level
Stereo Mix Output, Headphone/Line	Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
A-Net I/O	1 A-Net In, RJ45 connector; Supports Pro16 and Pro16e
D/A Conversion	44.1/48kHz, 24-bit
Stereo Operation	Stereo Link, per channel pair; Set at the input module; Variable pan per mono channel or pan/spread per stereo channel pair
Headphone Output	275 mW per side into 50 Ohms (both sides driven)
Output Impedance	5 Ohms
Freq. Response	3Hz-22kHz +0.2dB/-3dB at 50 Ohms
THD +N	< 0.003%
Output Voltage for Personal Mixers	24VDC, 0.5 amp Transmitted over the Cat-5e cable
Signal to Noise (unweighted)	-106dB (measured with zero data into all channels)
Latency	0.880 msec (measured from analog input to analog output)
Pro16e A-Net	Use Cat-5e (or better) cable; Maximum 400 ft (122 m) between devices; Supports Power Over A-Net
Cat-5 cable	Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Power	24 VDC, 0.5 amp; Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor
Dimensions	10.26" (260.6 mm) wide x 6.14" (155.95 mm) deep x 1.91" (48.51 mm) high
Weight	1.3 lb. (0.59 kg)
Options	MT-1a Microphone Stand Mount
AN-16/i v.2 Specifications
Audio Inputs	16, balanced line-level, 1/4-inch TRS connector
Inputs	Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru	Impedance matched output
Analog to Digital Conversion	48kHz sample rate, 24 bit
Frequency Response	4Hz-22kHz
A- Net In	One Category 5 (RJ45 connector) Four-position slot range selector switch for use with Pro16e A-Net
A-Net Out	One Category 5 (RJ45 connector)
Gain Settings	Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators	Signal Present and Clip, per channel
Line Inputs	Impedance: 48k ohms
Metering	LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation	Stereo Link, per channel pair; Two-position switch (Normal, Link)
Maximum Input Level	+22dBu
Input Impedance	17.8k ohm
Freq. Response	4Hz-22kHz +0.2dB/-3dB
THD +N	< 0.003%
Crosstalk	-90dB
Bit Error Rate (BER)	10(-12)
Signal to Noise (unweighted)	90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
Digital Outputs	A-Net: 1; RJ45 connector
Pro16e A-Net	Use unshielded Cat-5e UTP (or better) cable
Latency	<0.880 msec (measured from analog input to analog output)
Power Supply Input Voltage Output Voltage Plug Size	External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 18-24 VDC, 0.5 amp 2 mm
Power	18-24 VDC, 500mA
Dimensions	19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
Weight	6.8 lb (3.08 kg)
D400 Specifications
A-Net Input	Pro16 or Pro16e A-Net; RJ45 connector
A-Net Offset Base Slot	2-position DIP switch selects the starting channel that Personal Mixers will receive from the network (1, 17, 33, or 49)
Defeat Stereo Switches	Chooses between local (front panel) stereo links (up) or network stereo links (down)
A-Net Out to Personal Mixers	Eight RJ45 connectors, powered
A-Net Out	Pro16e A-Net; RJ45 connector, unpowered
LEDs	Power On (red); Network Sync (green)
Stereo Link	Two 8-position DIP switch blocks (1-16, 17-32)
Output Voltage for Personal Mixers	24VDC, 0.5 amp Transmitted over the Cat-5e cable
A-Net Cables	Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections
Power Supply	Internal, IEC connector
Input Voltage	100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz at220 W max
AC Fuse Types	115V range: T2.5AL/250V 230V range: T1.25AL/250V
Dimensions	19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high
Weight	12.0 lbs (5.44 kg)

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Aviom Mix320-A Personal Mixing System with Analog Interface

Identifiers

Technical Details

Reviews